FPCN50A Programmable Setting
Download the free FPCN50A Customer program software
How to Connect the FPCN30A radios to work with FPCN50A
Step 1 : Check which version of the FPCN30A radios you own. If it is on
You can simply set the FPCN50A radios to channel 11 ( analog mode ) and FPCN30A set to channel 1, then they can simply work together.
Step 1 : Download the FPCN30A configuration file to rewrite the frequency to match with FPCN50A.
The Setting is quite Simple.
Simply open the FPCN30A configuration file via the FPCN30A programmable software and click "Write" to save100%, then the frequency will update to match the FPCN50A.
Note : FPCN50A is dual mode, 1-10 channels are digital mode, which can not work with FPCN30A radios.11-12 channels can work with most of the UHF two way radios.
For Example :
FPCN50A Channel 11 equal to FPCN30A Channel 1
FPCN50A Channel 12 equal to FPCN30A Channel 2
and so on.
Connect the FPCN50A radios to work with FPCN30A
Program the FPCN50A to work with the FPCN30A radios directly. Please use the following FPCN50A configuration file to resave the frequency.
1) Open this file on the FPCN50A Programmable Software
2) Click the Channel section and confirm the frequency did match with your currect radios frequency and code ( For those radios made in 2026 with new frequency, please reach out to us for the newest configuration file )
3) Click the Write to save the frequency and code
